Alesis Vocal Zapper Spécifications Page 27

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 34
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 26
www.bhphotovideo.com
PHOTO - VIDEO - PRO AUDIO
PROCESSORS
RANE
AC 23 / AC 23B
738
Active Crossovers
The Rane AC 23 and AC 23B
active crossovers offer the
identical features and specs as
the AC 22 and AC 22B but with the ability to be configured for stereo 2- or 3-way, or mono 4- or 5-way operation. The AC 23,
like the AC 22 is available with1/4” TRS balanced/unbalanced inputs and1/4” TS unbalanced outputs while the AC 23B is
provided with XLR connectors
with active balanced inputs
and outputs.
SAC 22 / SAC 23
Stereo 2-Way and Stereo 3-Way Crossovers
The SAC 22 and SAC 23 employ the
same state-variable 4th-order
Linkwitz-Riley filters with steep 24dB
per octave rolloff slopes, as the AC 22
and AC 23 ensuring identical phase
characteristics on its low pass and high
pass outputs. The SAC 22 utilizes a single 31-position precision DC control voltage potentiometer to simultaneously select
the low and high frequency points while the SAC 23 uses two 31-position controls divided between low/mid and mid/high
crossover regions. This crossover circuit design provides a smart and easy way to biamp or triamp your audio system
while at the same time ensuring consistent accuracy from channel-to-channel and unit-to-unit that provides a distinct
advantage over continuously variable
designs using ganged potentiometers
which can yield large variations in
channel-to-channel matching. Both
units also feature active balanced XLR
inputs and outputs.
Crossover Features
31-position detented stereo crossover controls provide the simplest
way to biamp (SAC 22) or triamp (SAC 23) your system
Same 4th order Linkwitz-Riley crossover design as the AC22/23
An input level control allows decreasing the overall sensitivity of the
entire sound system, including the mono subwoofer if one is used
Separate low, high and mono subwoofer output level controls allow
compensation for sensitivity variations in amplifiers and drivers
Inputs and Outputs
Separate balanced XLR connectors are provided for the left and right
inputs as well as the stereo low and high outputs. Additional left and
right XLRs are provided for the mid outputs of the SAC 23
Subwoofer Output
The mono subwoofer out, with switchable 100Hz LP Filter, provides a
separate mono sum of the left and right low outputs.
The subwoofer output may be used along with the left and right low
outputs
Vue de la page 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Commentaires sur ces manuels

Pas de commentaire