Alesis NanoVerb Stereo Amplifier Manuel d'utilisateur télécharger pdf (Page 7)

Your First Session with the NanoVerb– Chapter 1

NanoVerb Reference Manual 7

CHAPTER 1

YOUR FIRST SESSION WITH THE

NANOVERB

Unpacking and Inspection

Your NanoVerb was packed carefully at the factory, and the shipping carton was

designed to protect the unit during shipping. Please retain this container in the highly

unlikely event that you need to return the NanoVerb for servicing.

The shipping carton should contain the following items:

•This instruction manual

•Alesis NanoVerb with the same serial number as shown on shipping carton

•AC Power Supply Adapter (Alesis P3)

•NanoVerb Quick Guide/Program Chart

• Alesis warranty card

It is important to register your purchase; if you have not already filled out your

warranty card and mailed it back to Alesis, please take the time to do so now.

Basic Connections

The NanoVerb will work in many different applications, whether you are connecting

an instrument directly into it, or connecting it with a mixing console. Briefly described

here are the basic connections to get you up and running quickly. For more

information on connections, please refer to Chapter 2.

• Mono In, Mono or Stereo Out. Connect a 1/4" phone cord to the [LEFT/MONO]

INPUT of the NanoVerb from a mono source. (The Left input will then feed both

inputs.) Connect another 1/4" phone cord from the [LEFT] OUTPUT of the

NanoVerb to an amplification system or mixer input. Additionally, you could

connect a second 1/4" phone cord to the [RIGHT] OUTPUT for use with a stereo

amplification system, or two mixer inputs.

• Stereo. Connect two 1/4" phone cords to the [LEFT/MONO] & [RIGHT] INPUTS

of the NanoVerb from a stereo source , and two 1/4" phone cords from the

[LEFT/MONO] & [RIGHT] OUTPUTS of the NanoVerb to a stereo amplification

system or two mixer inputs.

T I

EFT I

EFT

M I

EFFECT

If connecting to a mixing console’s aux sends/returns, you will want to turn the [MIX]

knob fully clockwise so that the NanoVerb outputs only wet (effected) signal.

Powering Up

After making your connections, turn on the system’s power using this procedure:

1 2 3 4 5 6 7 8 9 10 11 12 ... 28 29

Pas de commentaire

Alesis NanoVerb Stereo Amplifier Manuel d'utilisateur Page 7