Alesis NanoVerb Stereo Amplifier Manuel d'utilisateur Page 27

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 29
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 26
Troubleshooting – Chapter 5
NanoVerb Reference Manual 27
CHAPTER 5
TROUBLESHOOTING
Troubleshooting Index
If you experience problems while operating the NanoVerb, please use the following
table to locate possible causes and solutions before contacting Alesis Product
Support for assistance.
Symptom Cause Solution
The Power LED does not
light when the unit is
powered on.
No power. Check that the power cable
is plugged in properly.
Sound is distorted, Red
“Input” LED is lit
Input level is too high. Turn down the Input Level
control.
Sound is excessively noisy,
Green “Input” LED barely
lit.
Input level is too low Turn up the Input Level
control.
Output level is too low
and Aux Return on mixer
is up full.
Turn Output up and reduce
Aux Return level on mixer.
No audio is heard. Bypass function is on
with Mix turned 100%
wet.
Turn the Mix control to the
left or press the Bypass
Footswitch.
Output level is too low. Turn the Output control to
the right.
Hum or noise from output. Ground loop, unshielded
cables.
Try plugging the unit into
another power jack or
different audio cables.
Unit does not respond to
front panel controls.
Unknown software
conflict, cosmic rays, or
static electricity.
Power down and power up
again.
Maintenance/Service
Cleaning
Disconnect the AC cord, then use a damp cloth to clean the NanoVerb’s metal and
plastic surfaces. For heavy dirt, use a non-abrasive household cleaner such as
Formula 409 or Fantastik. DO NOT SPRAY THE CLEANER DIRECTLY ONTO THE
FRONT OF THE UNIT AS IT MAY DESTROY THE LUBRICANTS USED IN THE
SWITCHES AND CONTROLS! Spray onto a cloth, then use cloth to clean the unit.
Refer All Servicing to Alesis
We believe that the NanoVerb is one of the most reliable multieffects processors that
can be made using current technology, and should provide years of trouble-free use.
However, should problems occur, DO NOT attempt to service the unit yourself.
Service on this product should be performed only by qualified technicians. NO USER-
SERVICEABLE PARTS INSIDE.
Obtaining Repair Service
Before contacting Alesis, check over all your connections, and make sure you’ve read
the manual.
Vue de la page 26
1 2 ... 22 23 24 25 26 27 28 29

Commentaires sur ces manuels

Pas de commentaire