Alesis DM5Pro Kit Spécifications télécharger pdf (Page 144)

Troubleshooting

1 4 4 DM PRO REFERENCE MANUAL

which you hadn’t stored WILL BE ERASED when you perform a “re-init.”

Here’s what to do:

1. Turn the DM Pro off.

2. Hold down the [< CURSOR] and [CURSOR >] buttons. (Once you get the

hang of this, you can just press the middle of the [< CURSOR >] button with

one finger.)

3. Turn the DM Pro back on.

4. Let go of the [<CURSOR >] button after a couple of seconds .

You’ll know the DM Pro has been re-initialized if the display looks like this:

The nice thing is that for all its power, a re-initialization of the DM Pro does not affect

the User bank of Drumkits and Drums at all. Even nicer is the fact that it doesn’t

touch the Trigger Setups, which would be very time-consuming to reconstruct. Keep

in mind that it’s a good idea to back these things up to a MIDI storage device from

time to time. Any time you’ve reached the point where you would hate to lose the

work you’ve done, back it up!

MAINTENANCE/SERVICE

CLEANING YOUR DM PRO

Before doing cleaning of any kind, always disconnect the AC cord.

For simple dusting and removal of minor dirt, wipe the instrument down with a

slightly-damp cloth.

For heavy dirt, use a non-abrasive household cleaner such as Formula 409 or

Fantastik. Spray the cleanser onto a cloth, then use the cloth to clean the unit.

NEVER spray any cleaner directly onto the DM Pro — this can

destroy the lubricants used in the switches and controls!

PREVENTATIVE MAINTENANCE

• Periodically check the AC cord for signs of fraying or damage.

• Make sure the entire bottom surface of the keyboard is supported, so the rest of

the unit is not subjected to unnecessary bending.

• Keep the DM Pro in places which are not dusty.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 174 175

Pas de commentaire

Alesis DM5Pro Kit Spécifications Page 144