Alesis 03D Manuel d'utilisateur télécharger pdf (Page 184)

174 Chapter 15—Scene Memories

03D—Owner’s Manual

Recalling Scene Data Safely

When a mix scene is recalled, mix settings that do not match those in the Edit Buffer

are updated. In some situations, you may want to retain the mix settings of certain

channels. This is possible using the Recall Safe function on the RCL. Safe page.

1. Use the [SCENE MEMORY] button to locate the RCL. Safe page shown

below.

2. Use the cursor buttons to select channels and the [ENTER] button to make

them safe.

If you are using a mouse, simply click the switches.

3. Use the cursor buttons to select a SAFE MODE, and the [ENTER] button

to activate it.

In ALL PARAMETERS mode, all parameters are safe. In FADERS ONLY mode, just the

faders are safe.

4. Use the cursor buttons to select the ENABLE switch and press the [ENTER]

button to enable the Recall Safe function.

If you are using a mouse, simply click the ENABLE switch.

The ENABLE switch works as a master Recall Safe on/off switch, so you don’t have to

turn off individual channels when you want a scene recall to update all channels.

When a mix scene is recalled, providing that the master ENABLE switch is on, mix set-

tings are not applied to safe channels.

The Recall Safe settings are stored as part of the 03D Setup data. They are not stored in

scene memories.

If you recall a mix scene that contains stereo pair or group settings, and one of the chan-

nels in the stereo pair or group is set as a safe channel, the pair or group is cancelled and

the data applied only to the other channel.

If you try recall a mix scene that contains bus or aux pair settings, or surround pan set-

tings, that are different to those in the Edit Buffer, a message appears stating that you

cannot recall the mix scene. This is because the mix scene data is incompatible with the

Edit Buffer data.

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 301 302

Pas de commentaire

Alesis 03D Manuel d'utilisateur Page 184