Alesis MultiMix8USB Manuel d'utilisateur télécharger pdf (Page 5)

19. CHANNEL PAN – Adjusts the (mono) channel's position in the stereo field.

20. BALANCE (CH 5/6 & 7/8) – Adjusts the balance between Channels 5 and 6 and Channels 7 and 8.

21. LO EQ (BASS) – Adjusts the low (bass) frequencies of the channel.

22. MID EQ – Adjusts the mid-range frequencies of the channel.

23. MID EQ FREQ – Adjusts the frequency that the CHANNEL EQ (MID) will boost or cut.

24. HI EQ (TREBLE) – Adjusts the high (treble) frequencies of the channel.

25. AUX PRE SEND – Adjusts the channel audio (pre-EQ) level that is sent to the AUX SEND output. You can use this to

apply external effects to individual channels, or to create a custom monitor mix for yourself or your musicians.

26. FX POST SEND – Adjusts the channel audio (post-EQ) level that is sent to MULTIMIX 8 USB FX's internal effects

processor. Turn this up for the channels that you want internal effects applied to.

27. EFFECTS SELECTOR – Selects the effect that MULTIMIX 8 USB FX's internal effects processor will apply to the

various channels. Each channel can send different levels of audio to the processor by adjusting their FX POST SEND

knobs. See the EFFECTS section for an explanation of the available effects.

28. AUX RETURN LEVEL – Adjusts the volume of the AUX RETURN INPUTS.

29. FX RETURN LEVEL – Adjusts the volume of the MULTIMIX 8 USB FX's internal effects processor.

30. LED METERS – Shows the audio level of the main mix. Turn the volume down if the CLIP LED lights up excessively.

31. 2 TRKS/USB TO MAIN – Routes the audio from your computer and the

2 TRACK INPUTS to the MAIN OUT.

32. 2 TRKS/USB TO MONITOR – Routes the audio from your computer and

the 2 TRACK INPUTS to the MONITOR OUT and your headphones.

33. MAIN TO MONITOR – Routes the audio heard through the MAIN OUT to

the MONITOR OUT and your headphones.

34. MAIN VOLUME – Adjusts the volume of the MAIN OUT.

35. MONITOR VOLUME – Adjusts the volume of the MONITOR OUT.

36. PHONES VOLUME – Adjusts the volume to your headphones.

EFFECTS

TO HEAR THE EFFECTS ON A CHANNEL: Turn up the FX POST SEND (26) for that channel. Then, turn up the FX

RETURN knob (29). Press the MAIN TO MONITOR button to hear the mix in your headphones. Use the EFFECTS

SELECTOR KNOB (27) to choose one of the effects below:

ROTATING SPEAKER EFFECT

ROTARY: Fast rotary speaker simulator creates the classic, lush Doppler effect of an organ’s spinning horn. Effective on

guitars, vocals, keyboards and other instruments.

REVERB EFFECTS

HALL 1: A large, bright concert hall reverberation effect suitable for vocals and instruments.

HALL 2: A large, warm concert hall reverberation effect suitable for drums, piano and other instruments.

ROOM 1: A medium-sized, moderately bright reflective room reverberation effect suitable for vocals, lead guitars and other

instruments.

ROOM 2: A small, very reflective bright room reverberation effect suitable for drums and percussion as well as electric guitars

and other instruments.

ROOM 3: A large, warm room reverberation effect suitable for acoustic instruments.

PLATE 1: A lush, smooth vocal plate reverb with a long decay time and warm tonality.

PLATE 2: An emulation of vintage plate reverb with bright, slightly tinny tonality and a medium-length decay.

PLATE 3: A short, bright plate reverb effective for creating subtle spaces.

MODULATION EFFECTS

CHORUS: A complex, 6-voice chorus ensemble effect with short delays often referred to as a "Chorus / Doubler". Discrete

stereo signal path. Slow and watery.

FLANGE: Classic stereo flange: a slow, slightly metallic sweep with a discrete stereo signal path.

DELAY EFFECTS

DELAY 1: A simple slap-back echo with no feedback particularly effective on vocals and rhythm guitars.

DELAY 2: Medium-length poly-rhythmic delay with crossover feedback. 3 to 4 ratio between L and R delay times (291 to

388ms) for 3/4 vs. 4/4 feel. Useful for solo instruments where a long, trailing echo effect is desired.

MULTI EFFECTS

CHORUS – ROOM 1: Room reverb into a slow flanging modulation creates a spacey effect.

CHORUS – ROOM 2: Fast modulation provides a dramatic chorus effect in a small room for a very lush chorus + reverb sound

with a discrete stereo signal path.

BYPASS: Bypasses the effects processor – no effects will be heard.

When recording to your computer,

make sure the 2 TRKS/USB TO MAIN

switch is in the up/raised position to

avoid feedback in your recording.

Alternately, you can deactivate the

"software playthrough" function in your

software while recording.

1 2 3 4 5 6 7 8 9 10 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Alesis MultiMix8USB Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Alesis MultiMix8USB