Alesis 03D Manuel d'utilisateur télécharger pdf (Page 189)

About Automix 179

03D—Owner’s Manual

ABORT switch while recording is in progress. Pressing it when recording has already

stopped will not work. If memory is low and the undo buffer is disabled, you may not

be able to abort playback or recording. In this case, the ABORT switch appears gray.

First Mix Scene

Each automix starts with a mix scene recall event that recalls the ﬁrst mix scene. The

ﬁrst mix scene sets the mix settings as required at the beginning of an automix. Without

the ﬁrst mix scene, mix settings would remain the same as when automix playback was

stopped.

When a new automix is created, the mix scene last stored or recalled is automatically

selected as the ﬁrst mix scene. You can select another mix scene as the ﬁrst mix scene on

the Event Edit page. See Editing Events Off-line on page 193 for more information.

When a mix scene is recalled in an automix, the mix scene recall safe channel settings

are effective.

“Midnight Phenomenon” & Offset

The “midnight Phenomenon” refers to the discontinuity that occurs when a timecode

passes through midnight. As an automix can be offset, this is not a problem with the

03D. However, the 03D must determine whether a received timecode value refers to a

point before the start of an automix or to a point in the middle. For example, an auto-

mix runs from 23:00 through midnight. Then, the 03D receives a timecode value of

22:30. That could be interpreted as either 22:30 before the automix start or 22:30 after

the start. The 03D uses the following method to determine the correct point: If the

received timecode value is within one hour of the automix start (00:00:00.00 or offset

value), it is interpreted as being before the automix start, and the ﬁrst mix scene is

recalled. Otherwise, it’s interpreted as being after the start point and the automix is

played from that point.

Note: If you start recording at a time before the speciﬁed offset, the offset setting is auto-

matically moved to an earlier point so that the mix adjustments can be recorded. The time

positions of existing events, however, remain the same.

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 301 302

Pas de commentaire

Alesis 03D Manuel d'utilisateur Page 189