Alesis HR-16:B Manuel d'utilisateur télécharger pdf (Page 59)

the last displayed beat. The fast forward and rewind button can be held down

simultaneously to "freeze" the display on the current beat.

LOOP

The LOOP button is a simple on/off switch with an LED indicator. When LOOP is on, a part

or song will loop back to its beginning when it has reached its end and continue playing

indefinitely. If LOOP is off, a part or song will stop when it reaches its end.

MIDI ECHO

The MIDI ECHO button is an on/off switch with an LED indicator. When MIDI ECHO is on,

whatever information is present at the MIDI INPUT jack will be sent to the MIDI OUTPUT

jack. When not in RECORD or RECORD READY (RECORD LED lit), the MIDI data is

transmitted out unchanged.

When in RECORD or RECORD READY, and the track selected has been assigned to a

specific MIDI channel (see MIDI CHANNEL below), then all MIDI information received will be

transmitted out on the selected MIDI channel. This feature allows the user to hear a part

playing on the desired synthesizer while it is being recorded. System exclusive

information and polyphonic pressure are not echoed, and MID! clocking information will be

echoed only if MIDI clock is being used for clocking the MMT-8.

NAME

The NAME button is used to change the name of a part or song. The name of a part or

song is 14 characters long. An empty part or song will always have the name "EMPTY

PART" or "EMPTY SONG", and cannot be changed. When a part or song is first used, its

name is changed from "EMPTY PART" or "EMPTY SONG" to "NO PART NAME" or "NO

SONG NAME." To change the name of a part or song, press and hold the NAME button.

The display will read:

SELECT PART 00

NO PART NAME"

The cursor is now under the first character of the part or song name. Using the + and -

buttons, any alphanumeric character can be selected, and the keypad can be used to

enter numbers directly. The page up and page down buttons are used to move the

cursor left and right on the display. When the desired name has been entered, pressing

RECORD stores the name for that part or song. If RECORD is not pressed before

releasing the NAME button, any changes to the name will not be saved.

MERGE

The MERGE mode is provided so that two tracks can be merged together (overlapped)

onto one track. In part mode, when MERGE is held down, the display reads:

SELECT 2 TRACKS

TO BE MERGED

Alesis MMT-8 Instructions

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 71 72

Pas de commentaire

Alesis HR-16:B Manuel d'utilisateur Page 59