Alesis HR-16:B Manuel d'utilisateur télécharger pdf (Page 63)

This remains until the RECORD button is released. In both song and part mode, the tempo

can be changed while playing.

MIDI FILTER

The MIDI FILTER button is used to select what type of MIDI information will be recorded by

the MMT-8. While holding down the MIDI FILTER button, the page up and page down

buttons can be used to scroll through the possible choices, while the + and - buttons can

be used to turn each function on or off. The possible displays that can be scrolled through

are as follows:

RECORD MIDI

NOTES: ON

RECORD MIDI

PITCH BEND: QN

RECORD MIDI

AFTER TOUCH: OFF

RECORD MIDI

CONTROLLERS: QN

RECORD MIDI

PROG CHANGE: ON

RECORD MIDI

SYSTEM EXCL: QFF

RECORD ON MIDI

CHANNEL: ALL

Pressing the + button changes the display to ON, pressing the - button changes the

display to OFF. If a function is off, it will not be recorded into the MMT-8, and will not be

echoed out the MIDI OUT jack if MIDI ECHO is on. The last page selects which MIDI

channel the MMT-8 will record. Normally, it is set to ALL, which means that it will record on

all MIDI channels. It can also be set to 1 through 16, which will cause the MMT-8 to ignore

ali channels but the selected one while recording. Selecting 00 on the keypad wili display

ALL, and the individual channels can be selected as 01 through 16. The default settings

are as shown above, with all functions on except after touch and system exclusive.

CLOCK

The CLOCK button is used to set the clock input and output functions of the MMT-8.

Pressing and holding the CLOCK button allows access to the CLOCK pages. The first

page is used to select the clocking source, and will display one of the following choices:

CLOCK SOURCE:

MIDI & INTERNAL

Alesis MMT-8 Instructions ,

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 71 72

Pas de commentaire

Alesis HR-16:B Manuel d'utilisateur Page 63